Induction furnace's characteristics

Induction arc furnace-what are the characteristics of it?

1. Fast heating speed, high production efficiency, less oxidation decarbonization, saving material and forging die cost

Since the principle of medium frequency induction heating is electromagnetic induction, and its heat is generated in the workpiece itself, ordinary workers can carry out continuous work of forging task ten minutes after working with medium frequency electric furnace, and there is no need for professional workers to burn and seal the furnace in advance. There is no need to worry about the waste of heated blanks in the coal furnace caused by power failure or equipment failure.

Due to the fast heating speed of this heating method, there is little oxidation. Compared with coal-fired furnace, each ton of forging saves at least 20-50kg of steel raw materials, and its material utilization rate can reach 95%.

Because the heating method is uniform and the temperature difference between the core and surface is very small, it also greatly increases the service life of the forging die in terms of forging, and the roughness of the forging surface is less than 50um.

2. Superior working environment, improving workers' working environment and company image, no pollution and low energy consumption

Compared with coal furnace, workers of induction heating furnace are no longer subject to the baking and smoking of coal furnace under the scorching sun, which meets the index requirements of environmental protection department. At the same time, it establishes the external image of the company and the future development trend of forging industry.

3. The heating is uniform, the temperature difference between the core and the meter is very small, and the temperature control accuracy is high

Induction heating generates its own heat in the workpiece, so the heating is uniform and the temperature difference between core and surface is very small. The application of temperature control system can realize the accurate control of temperature and improve the product quality and qualified rate.